Другие журналы
scientific edition of Bauman MSTU
SCIENCE & EDUCATION
Bauman Moscow State Technical University. El № FS 77 - 48211. ISSN 1994-0408
Machine Building and Engineering Science
The Development of Power Distribution Law in Transmission of Active Road Based on the Analysis of the Power Factors in the Coupling Device
# 12, December 2016
DOI: 10.7463/1216.0852826
# 12, December 2016
DOI: 10.7463/1216.0852826
pp. 1-17
Numerically Analysed Thermal Condition of Hearth Rollers with the Water-Cooled Shaft
# 12, December 2016
DOI: 10.7463/1216.0852536
# 12, December 2016
DOI: 10.7463/1216.0852536
pp. 18-34
Selection of Rational Heat Transfer Intensifiers in the Heat Exchanger
# 12, December 2016
DOI: 10.7463/1216.0852444
# 12, December 2016
DOI: 10.7463/1216.0852444
pp. 35-56
he Estimated Operational Movability of Military Tracked Vehicles
# 11, November 2016
DOI: 10.7463/1116.0850365
# 11, November 2016
DOI: 10.7463/1116.0850365
pp. 1-14
Impact of Aluminum Alloy Parameters on Penetration Resistance of the Bullets 7.62 «Ball NATO» and «ARM2»
# 11, November 2016
DOI: 10.7463/1116.0850281
# 11, November 2016
DOI: 10.7463/1116.0850281
pp. 15-27
Calculating the Fluid Supply Parameters Through the Tubular Electrode in Electro-Discharge Sinking of Small Diameter Holes
# 11, November 2016
DOI: 10.7463/1116.0850013
# 11, November 2016
DOI: 10.7463/1116.0850013
pp. 28-37
Experimentally Investigated Thermo-Hydraulic Characteristics of the Loop Heat Pipe with an Open Compensation Chamber
# 11, November 2016
DOI: 10.7463/1116.0849572
# 11, November 2016
DOI: 10.7463/1116.0849572
pp. 38-54
Numerical Study of Differently Shaped HRG Resonators with Various Defects
# 10, October 2016
DOI: 10.7463/1016.0848188
# 10, October 2016
DOI: 10.7463/1016.0848188
pp. 1-22
Electrical Discharge 12X18H10T Steel Machining Process Optimization Based on the Task Solution of Moving a Boundary of the Material Phase Change
# 10, October 2016
DOI: 10.7463/1016.0847736
# 10, October 2016
DOI: 10.7463/1016.0847736
pp. 23-38
Analyzing the Application of Fractional Factorial Plans in Technological Researches: the Case of Machining
# 10, October 2016
DOI: 10.7463/1016.0847711
# 10, October 2016
DOI: 10.7463/1016.0847711
pp. 56-68
Rolling of Multilayer Composition Based on High-Carbon and Low-Carbon Steels
# 09, September 2016
DOI: 10.7463/0916.0846195
# 09, September 2016
DOI: 10.7463/0916.0846195
pp.1-10
The Tool Management System Development of a Milling Bay
# 08, August 2016
DOI: 10.7463/0816.0842907
# 08, August 2016
DOI: 10.7463/0816.0842907
pp. 11-20
Parameter Identification of Piecewise Linear Plasticity Metal Models Used in Numerical Modeling of Structures Under Plastic Deformation and Failure
# 06, June 2016
DOI: 10.7463/0616.0842395
# 06, June 2016
DOI: 10.7463/0616.0842395
pp. 1-17
Specific Features of Chip Making and Work-piece Surface Layer Formation in Machining Thermal Coatings
# 06, June 2016
DOI: 10.7463/0616.0842354
# 06, June 2016
DOI: 10.7463/0616.0842354
pp. 18-29
On the Effect of Thread Turn Profile Angle of the Planetary Roller-Screw Mechanism Parts on Their Basic Parameters
# 06, June 2016
DOI: 10.7463/0616.0842257
# 06, June 2016
DOI: 10.7463/0616.0842257
pp. 30-46
Numerically and Experimentally Investigated Turbulent Flow Structure Past a Single “Trench”
# 06, June 2016
DOI: 10.7463/0616.0842189
# 06, June 2016
DOI: 10.7463/0616.0842189
pp. 47-70
A Weldability Study of Structural Materials for Manufacturing Bearing Separators
# 06, June 2016
DOI: 10.7463/0616.0842150
# 06, June 2016
DOI: 10.7463/0616.0842150
pp. 71-82
Research Facility for Mechanical Press Closed Gap Adjuster
# 06, June 2016
DOI: 10.7463/0616.0842166
# 06, June 2016
DOI: 10.7463/0616.0842166
pp. 83-96
| Authors |
| Press-releases |
| Library |
| Conferences |
| About Project |
| Phone: +7 (915) 336-07-65 (строго: среда; пятница c 11-00 до 17-00) |  |
 |
|||
| © 2003-2023 «Наука и образование» Перепечатка материалов журнала без согласования с редакцией запрещена Phone: +7 (915) 336-07-65 (строго: среда; пятница c 11-00 до 17-00) | |||||