Другие журналы

scientific edition of Bauman MSTU

SCIENCE & EDUCATION

Bauman Moscow State Technical University.   El № FS 77 - 48211.   ISSN 1994-0408

Multi-Purpose Multimedia Training Module

# 12, December 2015
DOI: 10.7463/1215.0828457
Article file: SE-BMSTU...o164.pdf (1083.09Kb)
authors: V.M. Yaroslavtsev1,*, N.A. Yaroslavceva1



1 Bauman Moscow State Technical University, Moscow, Russia

The paper shows that with using modern computer technologies the educational and methodological principles can be most completely implemented through the specially designed module-based electronic packages. In this case the learning electronic library in discipline is based on the multi-purpose thematic modules, which comprise materials working together in common software environment to study theoretical issues and materials to form skills for using the acquired knowledge in practice and various forms of self-control and control. It was found that reference books and dictionaries included in training modules allow an added value in the studied subject. The practice of development of multimedia training modules shows that quite a wide range of topics in the particular area of expertise enables an easy transformation of such educational material for different learning tasks.

References
  1. Solovov A.V. Elektronnoe obuchenie: problematika, didaktika, tekhnologiya [E-learning: issues, didactics, technology]. Samara, Novaya tekhnika Publ., 2006. 464 p. (in Russian).
  2. Osin A.V. Elektronnye obrazovatel'nye resursy novogo pokoleniya: v voprosakh i otvetakh [Electronic educational resources of new generation: questions and answers]. Moscow, Sotsial'nyy proekt Publ., 2007. 32 p. (in Russian).
  3. Belous V.V. E-learning. Platforms and systems . Inzhenernyi vestnik MGTU im. N.E. Baumana = Engineering Herald of the Bauman MSTU , 2013, no. 7, pp. 501-512. Available at: http://engbul.bmstu.ru/doc/654234.html, accessed 01.11.2015. (in Russian).
  4. Baklanov A.G., Bulanov I.M., Gornev V.F., Ivanov V.M., Kalinichev V.A., Karpov V.M., Kashuba L.A., Klyuev V.V., Kuznetsov V.M., Nekhoroshikh G.E., Sal'nikov A.A., Tarasov V.A., Tuktanov A.G., Yaroslavtsev V.M., Yaroslavtseva N.A. E.A. Satel': Shkola tekhnologii mashinostroeniya [ E.A. Satel: School of mechanical engineering technology ]. Moscow, Publishing House “Spektr”, 2011. 232 p. (in Russian).
  5. Fedorov I.B. Engineering education – status, problems, prospects . In: Fedorov I.B., Tikhonov A.I., eds. Integratsiya obrazovaniya, nauki i proizvodstva: materialy sektsionnogo zasedaniya Mezhdunarodnoi konferentsii 9 Mezhdunarodnogo foruma “Vysokie tekhnologii 21 veka” [ Integration of education, science and industry: proc. of the International Conference of the 9 International Forum “High Technologies of 21 Century” ], Moscow, 23 April, 2008. Moscow, Bauman MSTU Publ. , 2008, pp. 10-18. (in Russian).
  6. Fedorov I.B., Korshunov S.V., Norenkov I.P. et al. Informatsionnye tekhnologii v inzhenernom obrazovanii [ Information technology in engineering education ]. Moscow, Bauman MSTU Publ. , 2007. 432 p. (in Russian).
  7. Yaroslavtsev V.M., Yaroslavtseva N.A. Metody razmernoy obrabotki: mul'timediynyy uchebnik [Dimensional machining methods: multimedia tutorial]. Moscow, Bauman MSTU Publ., 2013, CD-ROM, state reg. no. 0321302137 . (in Russian).
  8. Korshunov S.V., Ageeva T.I., Yaroslavtseva N.A. The second life of educational films. Universitetskaya kniga , 2000, no. 9, p. 12. (in Russian).
  9. Demikhov K.E., Yaroslavtsev V.M. System training module: new form of creation of educational material. Universitetskaya kniga , 2000, no. 8, pp. 19-22. (in Russian).
  10. Yaroslavtsev V.M. Obrabatyvaemost' rezaniem. Raschet rezhimov rezaniya: mul'timediinoe ucheb. posobie po distsipline “Perspektivnye tekhnologii renovatsii” [Machinability by cutting. Calculation of cutting modes: multimedia tutorial on subject “Advanced technologies of renovation” ]. Moscow, Bauman MSTU Publ. , 2014, CD-R, state reg. no. 0321403104. (in Russian).
  11. Yaroslavtsev V.M., Yaroslavtseva N.A., Egorov E.A. Raschetno-issledovatel'skii praktikum “Obrabotka rezaniem” [ Computational research workshop “Machining by cutting” ]. Moscow, Bauman MSTU Publ. , 2001, CD-R, state reg. no. 0320100075. (in Russian).
  12. Yaroslavtsev V.M. Obrabotka rezaniem polimernykh kompozitsionnykh materialov: mul'timediinoe uchebnoe posobie [Machining by cutting of polymeric composite materials: multimedia tutorial]. Moscow, Bauman MSTU Publ., 2011, CD-R, state reg. no. 0321101387. (in Russian).
  13. Yaroslavtsev V.M. Ul'trazvukovaya abrazivnaya obrabotka materialov: mul'timediinoe uchebnoe posobie po distsipline “Tekhnologiya obrabotki materialov” [ Ultrasonic abrasive materials processing: multimedia tutorial on subject “Technology of Materials” ]. Moscow, Bauman MSTU Publ. , 2012, CD-R, state reg. no. 0321201040. (in Russian).
  14. Yaroslavtsev V.M. Energeticheskie kharakteristiki i dinamika protsessa rezaniya: mul'timediinoe nauchnoe izdanie: elektronnoe uchebnoe izdanie [Energy characteristics and dynamics of cutting process: multimedia scientific publication: educational electronic edition]. Moscow, Bauman MSTU Publ. , 2012, CD-R, state reg. no. 0321201041. Available at: http://technomag.bmstu.ru/doc/452443.html, accessed 01.11.2015. (in Russian).
  15. Domnikov A.S., Belous V.V. Rational orderliness of study course modules. Nauka i obrazovanie MGTU im. N.E. Baumana = Science and Education of the Bauman MSTU, 2014, no. 5, pp. 192-205. DOI: 10.7463/0514.0710096 (in Russian).
  16. Kovshov A.N., Nazarov Yu.F., Yaroslavtsev V.M. Netraditsionnye metody obrabotki materialov: mul'timediinyi uchebnik [Nonconventional methods of materials machining: m ultimedia tutorial ]. Moscow, Bauman MSTU Publ., CD-R, state reg. no. 0320600999. (in Russian).
Поделиться:
 
SEARCH
 
elibrary crossref ulrichsweb neicon rusycon
Photos
 
Events
 
News



Authors
Press-releases
Library
Conferences
About Project
Rambler's Top100
Phone: +7 (915) 336-07-65 (строго: среда; пятница c 11-00 до 17-00)
  RSS
© 2003-2020 «Наука и образование»
Перепечатка материалов журнала без согласования с редакцией запрещена
 Phone: +7 (915) 336-07-65 (строго: среда; пятница c 11-00 до 17-00)