SCIENCE & EDUCATION

Article file: SE-BMSTU...o558.pdf (1274.59Kb)

1 Bauman Moscow State Technical University, Moscow, Russia

The article compares the modeling results of dynamic processes in the three-dimensional mechanical systems, obtained through the application " simulation of kinematic mechanisms" of NX system and domestic PA8 and PA9 systems. Comparison is done for mathematical and physical pendulum whose behavior is described by an analytic solution that allows an objective evaluation the resulting numerical solution. The periods of pendulum swing, obtained in NX and PA9 systems coincide to the third decimal place. The paper implements a modeling gyroscopic effect, calculation of precession and nutation periods, as well as comparison with the analytical values of the approximate theory of gyroscopes; for NX and PA8 a divergence is maximum 6.5%. Simulation of two-link mechanism in NX and PA9 systems has shown almost complete consistency of the results. For a system mechanism consisting of bodies, cylindrical and ball joints, a divergence of the results is of 10%, due to different models of elements and because of differently specified impact. The research results allow us to draw a conclusion on the competitiveness of PA8 and PA9 systems (and even on their advantages). So in case of available Russian graphic editors and their programming interface, creating the high-quality domestic CAD can be suggested.

1. Prokhorenko V.P. SolidWorks prakticheskoe rukovodstvo [ SolidWorks practical guide ]. Moscow, Binom Press, 2004. 448 p. (in Russian).
2. Borgonjen R. Uchimsia 3D-modelirovaniiu vmeste s Solid Edge [Learning 3D-modeling with Solid Edge] (Russian translation). Moscow, DMK Press, 2012. 596 p.
3. Kontsevich V.G. Tverdotel'noe modelirovanie mashinostroitel'nykh izdelii v Autodesk Inventor [ Solid modeling of engineering products in Autodesk Inventor ]. Moscow, DMK Press, 2007. 672 p. (in Russian).
4. Basov K.A. CATIA V5 Geometricheskoe modelirovanie [ CATIA V5 Geometric Modeling ]. Moscow, DMK Press, 2008. 269 p. (in Russian).
5. Pro/ENGINEER . RuCadCam.Ru: website. Available at: http://rucadcam.ru/publ/pro_engineer/proengineer/7-1-0-14, accessed 01.10.2015. (in Russian).
6. Goncharov P.S., El'tsov M.Iu., Korshikov S.B., Laptev I.V., Osiiuk V.A. NX dlia konstruktora-mashinostroitelia [ NX for Designer-Machine Engineer ]. Moscow, DMK Press, 2010. 498 p. (in Russian).
7. Danilov Iu., Artamonov I. Prakticheskoe ispol'zovanie NX Siemens [ Practical use of NX Siemens ]. Moscow, DMK Press, 2011. 331 p. (in Russian).
8. Primenenie kompleksa PA9 dlia proektirovaniia ob"ektov mashinostroeniia [Application of P А 9 complex for design of engineering objects]. Distance Learning Center of the Bauman MSTU : website. Available at: http://wwwcdl.bmstu.ru/Press/Press.html, accessed 01.10.2015. (in Russian).
9. LMS Simulation and Testing Solutions for Functional Performance Engineering . Siemens PLM Software: company website. Available at: http://www.plm.automation.siemens.com/ru_ru/products/lms/index.shtml, accessed 28.08.2015. (in Russian).
10. Norenkov I.P., Zhuk D.M., Manichev V.B., Trudonoshin V.A. Analysis of electronic circuits in a joint application of explicit and implicit integration methods . Izvestiia vuzov. Radioelektronika , 1979, vol. 22, no. 6, pp. 25-28. (in Russian).